Results 1 to 2 of 2

Thread: Clarke Tech ET-9000 Control Centre Version 1.1

  1. #1
    Super Moderator CoolST's Avatar
    Join Date
    29-03-11
    Location
    Hamburg
    Posts
    1,809
    Thanks
    919
    Thanked 1,041 Times in 474 Posts
    Downloads
    7
    Uploads
    0

    Clarke Tech ET-9000 Control Centre Version 1.1









    Clarke Tech ET-9000 Control Centre Version 1.1 by Lee Hudson
    -----------------------------------------------------------------------------

    Installation Instructions
    -------------------------
    Unzip all the files and folders in the zip file to your local hard drive.

    Code:
    How to Use ET9000CC
    -------------------
    1. Run the ET9000CC.exe application.
    2. Enter the IP address of your Receiver in the IP Address field, example 192.168.1.5
    If your using a private local IP address enter the IP like this: 010.000.000.001
    3. If you have changed the password on your receiver, enter the password in the password field 
    otherwise leave blank.
    4. Click Connect Button
     
     
    Telnet
    ------
    Self explanatory.
    For a list of Busybox commands check out the following website:
    [Only Registered Users Can See Links. Click Here To Register...]
     
     
    FTP
    ---
    Click the FTP Button.
    This will load FileZilla FTP Client and automatically connect to your Receiver
    For instructions on using FileZilla check out the following website:
    [Only Registered Users Can See Links. Click Here To Register...]
     
     
    Settings Backup
    ---------------
    Click on Settings Backup Button.
    Click the Backup Settings Button.
    This will backup all the channel & satellite settings from the Receiver to the ******* and tuxbox folders on your PC HDD.
    The /******* and /tuxbox folders will be located in the same folder as this program.
     
    Click the Restore Clarke Tech Receiver Settings Button.
    All your backup data will be restored to the /etc/******* and /etc/tuxbox folders on the Receiver
    Once the files have successfully been restored you'll have to reboot the receiver by powering off 
    and on using the switch on the back of the receiver.
     
     
    Media Files Manager
    -------------------
    Uploading a Media File:
    Select the Hard Drive and folder that contains your Media File.
    Select the PVR device you have installed from the "Choose PVR Device" drop down window.
    Click on the Local file you want to upload so it's highlighted in blue.
    Click the Upload Button to transfer the file from your local HDD to the Receiver.
     
    Downloading a Media File:
    Select the Hard Drive and folder that you wish the file to be transferred too.
    Select the PVR device you have installed from the "Choose PVR Device" drop down window.
    Click on the Remote file you want to download so it's highlighted in blue.
    Click the Download Button to transfer the file from the Receiver to your local HDD.
     
    Deleting Local File:
    Select Local file so it's highlighted in blue.
    Click Delete Local File Button.
     
    Deleting Remote File:
    Select remote file so it's highlighted in blue.
    Click Delete Remote File Button.
     
     
    HDD Manager
    -----------
    To mount and format a Hard Disk Drive do the following:
    Select the Hard Disk type.
    Click the Format Button.
     
    This will erase all the data on the Receiver HDD.
     
    Wait until the format has completed. It can take approx 10-15 minutes for a 1TB HDD. 
    You'll see a command prompt when the format has completed.
     
     
    WebControl
    ----------
    Click the WebControl Button to open WebControl in your default web browser.
     
     
    Upload Channel List
    -------------------
    Select the local directory where the Channel List is sorted.
    Double click the folder to list the files.
    Click the "Upload Channel List" Button.
    When you see the "Channel List Uploaded! Reboot Receiver" message box appear click OK.
    Now Reboot Receiver by powering off and on.
     
     
    IPK Installer
    -------------
    Click the "..." Button to select the local directory where the "ipk" file is located.
    Now click the "Upload and Install IPK File" Button.
    The selected "ipk" file will be transferred to the /tmp folder then installed.
    Details of the installation will be viewable in the terminal window.
     
     
     
    Version History:
    ----------------
    Version 1.1 Released 11-7-2011
     
    Added IPK Installer.
    Fixed Telnet paste issue. You can now use CTRL V or Right Mouse Button to paste code from clipboard to Telnet Window.
     
     
    Version 1.0 Released 20-12-2010
    First Public Beta Release.
     
    Kind Regards
     
    Lee.
    Released 11-7-2011
    Last edited by CoolST; 11-07-11 at 03:26 PM.

  2. The Following 6 Users Say Thank You to CoolST For This Useful Post:

    balkanexpress  (07-09-12), easy  (16-07-11), FTS  (11-07-11), Gabriella  (12-07-11), z-pg-3  (11-07-11)

  3. #2
    Super Moderator CoolST's Avatar
    Join Date
    29-03-11
    Location
    Hamburg
    Posts
    1,809
    Thanks
    919
    Thanked 1,041 Times in 474 Posts
    Downloads
    7
    Uploads
    0
    File Attached ..
    Attached Files Attached Files

  4. The Following 4 Users Say Thank You to CoolST For This Useful Post:

    ballalley9  (29-09-11), fiston  (22-09-11), florinnn  (04-08-11), seschneider  (23-10-11)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •